4 person Outdoor Sauna Power requirements
Electrical Requirements for the Innerlight 4 Person Outdoor Sauna
To properly power your new Innerlight 4 person outdoor sauna, you will need to have a licensed electrician install the following power point.
Required Power Point:
- 3 Flat Pin 20 Amp Socket
- Compliant with Australian electrical standards
Sauna Electrical Details:
- Power Cable Length: 5 meters
- Cable Location: Runs from the top back of the sauna
- Maximum Power Requirement: 4244 Watts
The sauna comes equipped with a 3 flat pin 20 amp plug, but this requires a matching power point to be installed by a qualified electrician. This specialised power point is necessary to safely and properly power the sauna.
This power point must be installed by a licensed electrician prior attempting to use your new Innerlight 4 person outdoor sauna. Proper electrical setup is essential for the safe and reliable operation of your sauna.
If you have any other questions, please don't hesitate to contact our customer support team. We're here to help ensure you have a smooth and successful sauna installation
This is the power point required or similar.
This is the plug used on the sauna cable
Return the Innerlight Infrared 4 person outdoor sauna